CE Test Questions
Get Out of the Dark about New Sun Lens Technologies and Exceed Patient Expectations

Exam Questions
1. Why does adding new sunlens products and technologies better meets patient's expectations?

    A. Consumers like what's “new”
    B. Are intrigued by new technologies, or products
    C. Want “the best in the category”
    D. Any of the above
2. The following lens color provides contrast in low light and reduces eye strain in bright light:

    A.

Grey

    B.

Yellow

    C.

Green

    D.

Brown

3. All of the following make a clear lens enhanced for outdoor use except

    A. Light management technologies
    B. Higher indices
    C. Polarizing film
    D. Materials that pass Z87.1 impact standards
4. The reason that a lens appears gray and colors a seen in their correct hue is because

    A. Gray lenses effectively absorb all visible wavelengths evenly
    B. Gray lenses effectively absorb all wavelengths evenly below 380nm
    C. Their density is uneven
    D. None of the above
5. A G-15 lens

    A. Transmits about 85% light
    B. Transmits about 15% light
    C. Absorbs about 15% light
    D. Absorbs all the red wavelengths
6. Polarizing filters incorporated in lenses

    A. Is a method of light management
    B. Absorbs polarized light reflected off flat surfaces
    C. Reduces scatter
    D. All of the above
7. Examples of blinding glare are reflections of all of the following except:

    A. Pavement
    B.

Water

    C.

Shiny metal surfaces

    D.

Snow

8. The lightness of lenses is the result of

    A. Lens volume
    B. Specific gravity of the lens material used
    C. Impact resistance
    D. All of the above
9. To solve the problem of tint dye fading over time all of the following are true except

    A. Use lenses that are tinted deeply
    B. Add more red dye to the lens
    C. Consider body tinted sunlenses for planos
    D. Use polarized Rx lenses
10. New, “dye bonding” fixed tint NXT lenses don't change color because

    A. They have tint depth to about 0.9mm
    B. The dye always remains only at the lens' top surface
    C. Color is infused into the lens back
    D. Any of the above
11. All of the following -4.00 sphere lenses have even and uniform sunlens color except

    A. Polarized lenses
    B. In-mass tinted
    C. Dye-bonded NXT
    D. Tinted lenses
12. To deliver the lightest lens materials:

    A. Consider the lightest lens materials:
    B. Consider higher index lenses
    C.

Use more impact-resistant materials for thinner centers

    D.

All of the above

13. Lenses that require more than the FDA minimum for impact resistance

    A. Are tested at high velocity
    B. Have both frames and lenses tested to the Z87.1 standard
    C.

Are lenses like sunwear that may be subjected to extreme stresses

    D. All of the above
14. Sunlenses made from ____________ regularly meet Z87.1 standards

    A. NXT
    B. Polycarbonate
    C. Trivex
    D. All of the above
15. Notch sensitivity is

    A. The tendency for materials to chip under stress
    B. The tendency for chips or micro-cracks to lengthen into cracks
    C. A materials change in color or density
    D. All of the above
16. Materials with virtually no notch sensitivity are

    A. NXT and polycarbonate
    B. Polycarbonate and Trivex
    C. Spectralite and NXT
    D. NXT and Trivex
17. While most people wear low abbe material lenses successfully

    A. A higher abbe can increase peripheral lens clarity in higher Rx lenses
    B. A lower abbe can increase peripheral lens clarity in higher Rx lenses
    C. A higher abbe can increase peripheral lens clarity in plano lenses
    D. None of the above
18. What is the an attribute most requested by patients when buying new eyewear?

    A. Thinness
    B. Durability
    C. Lightness
    D. Scratch resistance
19. Sun protection is a critical must for sunlenses. All of the following materials absorb 100% of the UV before any light management is added, except

    A. NXT
    B. 1.67 high index
    C. Trivex
    D. Plastic hard resin
20. To deliver sunwear with a competitive advantage and outstanding patient satisfaction:

    A.

Optimize light management

    B.

Use lens materials optimized for performance

    C. Embrace new sun lens technologies
    D. All of the above

Evaluation Questions

21. In questions 21-24 please rate the effectiveness of how well each course met the stated learning objectives: Met the stated learning objectives?

    A. Excellent
    B. Very Good
    C. Good
    D. Fair
    E. Poor
22. Avoided commercial bias/influence?

    A. Excellent
    B. Very Good
    C. Good
    D. Fair
    E. Poor
23. How would you rate the overall quality of the material presented?

    A. Excellent
    B. Very Good
    C. Good
    D. Fair
    E. Poor
24. How were you directed to this course?

    A. 2020mag.com
    B. OAA Website
    C. NYSSO Website
    D. Ohio Opticians Website
    E. Other
25. Please describe the office in which you work.

    A. Independent Optician
    B. Independent Optometry
    C. Chain retail
    D. HMO/Military/Other
26. Comments on this program: